Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the bb-booster domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/wp-includes/functions.php on line 6114
Multi Axes Encoder Emulator – Customized Motion Systems Control Development
  • Sercos to Quadrature encoder signal emulator
  • A, B and Index differential outputs
  • Optional Pulse & Direction and Enable outputs for low cost servo drives control
  • Position data: Linear in mm or rotational in degree
  • Configurable per channel CPR (counts per revolution), Index offset, Index width, number of Index per revolution
  • Proprietary Integral linear interpolation for smooth pulse rate
  • Maximum pulse rate – 5MHz
  • Update every Sercos cycle
  • One open collector input with internal pull-up
  • 2, 4 or 8 encoder outputs channels configurations
  • Single 18 – 28V DC input supply
  • Galvanic isolation and optional 5V supply for each encoder interface to meet load voltage potential
  • D-Type 9 pins connector for each channel
  • Small form factor – 210 X 110 X 45mm DIN-Rail mounted

Our Approach

8 Axes Encoder Emulator

Our Story

By using the Encoder Emulator real-time cyclic position data, available as Sercos digital value, will be
transformed to quadrature encoder or pulse & direction output train signals.
Typical use may be triggering Ink-Jet printing head or Ultrasonic module according to 3D trajectory data or
generate command to Pulse & Direction low cost servo drives used as service axes in a machine.
The Multi-Channel Encoder Emulator is connected to the Sercos system as a slave, real-time channel is
used for cyclic data and service channel used for configuration.